Quick Price Inquiry
Beilken Sails logo
Request a quote

Home / Sails / Classic Mainsail Quote

Sailmaking

Request a quote for your mainsail

Please enter the measurements you have available. If we have any further questions, we will contact you.

Angebot Großsegel klassisch

Type of inquiry

Boat data

Rig parameters

Side view of a boat with a plumb line dropped from the masthead and the horizontal distance to the mast axis
Mast rake: drop a plumb line from the masthead to the deck, then measure the horizontal distance to the mast axis.
Four mast profiles with bend at the top, in the middle, at the bottom and without bend
Mast bend: where does the mast deviate most from a straight line — and how large is that distance in centimetres?

Rig dimensions

Please use your measurement certificate — if you do not have one, we are happy to measure on site.
Sail plan with the rig dimensions I, J, P and E on the mainmast and PY and EY on the mizzen mast
The rig dimensions on the standing rig — all figures in metres.

Wind conditions

Mainsail / mizzen — cut & cloth

Three sail cross-sections with different draft depths: full profile, all-around and flat profile
Profile shape in cross-section at half sail height.
Four mainsails with different batten layouts: standard, top batten full length, fully battened and without battens
The four batten variants for the leech.

Mainsail and mizzen dimensions

Please enter the values determined according to our measuring instructions.
Mainsail with the dimensions luff P, foot E, leech AL, reef heights R1 and R2 and backstay length G
The main dimensions of the mainsail — all figures in metres.
Enlarged detail at the mast foot with the dimensions H1 to H5 for cut-outs, tack fitting and reef hook
Detail at the mast foot: cut-outs (H1, H2), tack fitting (H3, H5) and reef hook (H4).

Attachment to the mast (luff)

Two mast cross-sections: bolt rope in the mast groove and mast slide with shackle
Luff attachment on the mast: bolt rope in the groove or mast slides.

Attachment to the boom (foot)

Four side views of the main boom: bolt rope in the boom groove, loose foot with hook-and-loop tape, loose foot with boom car and boom slides
The four variants of foot attachment on the main boom.

Mast section

Three mast cross-sections: round section with groove, oval section with groove and section with an external track
Mast sections in cross-section. Please choose the type that matches your mast — if in doubt, send us a photograph of the mast groove.

Sail number & insignia

Mainsail showing the position of the class insignia and sail number, starboard higher than port
Position of the sail insignia and sail number in the mainsail. Starboard sits higher than port.

Dimensions of the previous sail

Helps us cross-check — please always give lengths in metres.
Drawing of the existing mainsail with the dimensions luff P, foot E, leech AL, headboard width Kb, reef heights R1 and R2 and the sail area
Dimensions of the existing sail: luff (P), foot (E), leech (AL), headboard width (Kb), reef heights (R1, R2) and area.

Remarks

Address details